Ford LTD II Recall

BLADES MAY CRACK AND MAY, OVER A PERIOD OF TIME, LOOSEN FROM FAN ASSEMBLY.

SOME OF THE FLEXIBLE FIVE-BLADE ENGINE COOLING FANS MAY BE SUBJECT TO HIGH BLADE STRESSES THAT CAN RESULT FROM RESONANT VIBRATION INPUTS OCCURRING DURING NORMAL VEHICLE OPERATION. THIS CAN LEAD TO FATIGUE CRACKING OF THE BLADES. PORTIONS OF THE BLADE MAY SEPARATE FROM THE FAN ASSEMBLY WITHOUT PRIOR WARNING.

THE INVOLVED VEHICLES WERE PRODUCED WITH BRAKE PUSH-ROD TO BRAKE PEDAL RETAINING PINS WHICH WERE NOT HEAT-TREATED AS SPECIFIED. THIS COULD ALLOW THE BRAKE PEDAL TO BECOME DISENGAGED FROM THE PUSH-ROD.

THE INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH INCORRECT WELD NUTS THAT ATTACH THE REAR PORTION OF THE FRONT OUTBOARD SEAT TRACK TO THE FLOOR PAN. THE INCORRECT NUTS HAVE AN OVERSIZE DIAMETER AND THREAD, AND UPON FRONT SEAT TRACK ANCHOR BOLT INSTALLATION, THE THREADS MAY HAVE BEEN STRIPPED.

THE STEERING GEARS ON THE INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH IMPROPERLY MANUFACTURED SECTOR SHAFTS FROM WHICH THE THREADED PORTIONS OF THE SHAFTS MAY FRACTURE AND SEPARATE. SHOULD THE SECTOR SHAFT FRACTURE, THE PITMAN ARM MAY DISENGAGE FROM THE SPLINED PORTION OF THE SECTOR SHAFT.

THE INVOLVED VEHICLES ARE EQUIPPED WITH SHOULDER HARNESS RETRACTORS THAT MAY NOT LOCK. SHOULD THE VEHICLE EXPERIENCE A SUDDEN DECELERATION OR IMPACT, THE FRONT SEAT OCCUPANT MAY NOT BE RESTRAINED BY THE SHOULDER HARNESS PORTION OF THE THREE-POINT SEAT BELT SYSTEM. FURTHERMORE, THE SHOULDER HARNESS RETRACTORS MAY NOT ALLOW EXTRACTION OF THE SHOULDER BELT WEBBING DUE TO A PRE-LOCKED CONDITION. THIS IS A NON-COMPLIANCE TO THE EMERGENCY LOCKING RETRACTOR PERFORMANCE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES".